Germany's New Nuclear Fusion Reactor DESTROYS The Entire Industry!

i live in germany and didnt even know this thing exist 😮

Engineering should be left to the Germans because they were born for it

This takes humanity to the next level and some do not know what is meant by that

A good bit of competition never hurt anyone!

God bless Germany 🇩🇪

I wonder if the high flux reactor I worked on Long Island. I’m retired and have been ignoring their requests to contact . Most interesting . There’s a lot of these labs that prove promising futures . I’ll see if anyone replies ..

Without exponentially increasing pressure, temperature, and mass. Society will not be able to achieve, and sustain the temperatures needed to engage the fusion strong force process. The technology needed to create an environment favorable to sustain nuclear fusion is more than 30-50 years away. It is pretty much impossible using today's materials, and technology. It just ain't going to happen anytime soon." To achieve the energy output of a star, a star you must become." (N.D Tyson)

I think that means it is better than any other.

The cost of the fusion hardware will be very high, resulting in a high cost per kWh. Renewables will likely remain cheaper per kWh power generated.

Excellent summary, very informative. Reminds me of my science report on the Tokamak back in '93. Can't believe it's been 3 decades they've been working on it. Hope it works out. Maybe this time around, as when fission reactors came online and touted "energy too cheap to meter" that will actually be true rather than making energy even more expensive 😏

Where is the beef ? Why not just make great fission based units NOW. May not be enough cheap oil to finish the fusion dream. ❤❤

The great German people.... always at mankinds vanguard.. 21 Gun salute from Mexico...

National Ignition Facility, a lesson in how to spend $Billions over decades to create enough energy to boil a small pot of water, then tell the world of your success.

For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of automatically synchronizing cardinal grammeters. Such an instrument is the turbo encabulator. Now basically the only new principle involved is that instead of power being generated by the relative motion of conductors and fluxes, it is produced by the modial interaction of magneto-reluctance and capacitive diractance. The original machine had a base plate of pre-famulated amulite surmounted by a malleable logarithmic casing in such a way that the two spurving bearings were in a direct line with the panametric fan. The latter consisted simply of six hydrocoptic marzlevanes, so fitted to the ambifacient lunar waneshaft that side fumbling was effectively prevented. The main winding was of the normal lotus-o-delta type placed in panendermic semi-boloid slots of the stator, every seventh conductor being connected by a non-reversible tremie pipe to the differential girdle spring on the “up” end of the grammeters. The turbo-encabulator has now reached a high level of development, and it’s being successfully used in the operation of novertrunnions. Moreover, whenever a forescent skor motion is required, it may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration.

The choice to go for the difficult steady state operation process is typical for theoretic physicists ..... What we need are engineers who are more practical and undoubtedly will go for an intermittent process ... whereby the plasma burst directly induces an electromagnetic field to produced electricity.

Easy explanation for kids. Take two magnets with same pole next to each other. They repel. Push them together by force is what that machine does. They use big power magnets and force them together on same pole. They need a container locked to see what happens to the air and space between the 2 magnets as they get closer to each other. This is natural nature with correct tools.

Такой агрегат придумали и сделали в первые в СССР в 1978 году.. точнее прказали англичанам работающую модель

Some of it looks like what Bob Lazar was describing back in the day. Crazy.

Germany. It is Germany. Topnotch technology as always.

A very informative look into the 'Fusion' space over the past decades and up to now. I /we have so much to learn before we finally produce more than we use.