How To Legally Rearm Grr'nade Fuzes With a Time Delay of your Choosing
27,773
Published 2024-07-19
Follow all Federal, State, and Local laws. Be familiar with ATF rules and regulations concerning destructive devices. This technique is for legal smoke emitting devices only. Use of this technique with a device intended to cause harm constitutes a felony.
This video shows how to rearm any mousetrap-style fuze for reuse. See the QR codes in video for reference documents. With this technique you can set your own desired time delay.
Igniter kits can be purchased at www.inventionIncarnate.com
Instructions and Documentation can be found at: www.inventionIncarnate.com
00:00 Introduction
05:37 Time Fuse Preparation
09:01 Ignition Cup
14:25 Drilling Mousetrap Assembly
15:12 Installing Time Fuse
16:02 Two Canisters
18:02 Priming Secondary Fuse
19:40 Connecting Time Fuse and Secondary Fuse
20:29 Using Boiling Water to Bend Spoon
23:06 Second Canister
24:36 Connecting Fuses via Constrictor Hitch
27:45 Documents and QR codes
28:20 Final tests
All Comments (21)
-
I been doing the EXACT same thing for awhile. Took me FOREVER to figure it out and a lot of different prototypes.. looked like you tried all the same things I did. I got lazy and never made any tutorials or videos and you beat me to it. Good for you man
-
THANK YOU AGAIN FOR SHARING WITH WE THE PEOPLE. WE ENJOY YOUR THOUGHTS AND VIDEOS.....😊
-
Thanks for making the info free, this is how I’m making learning Fun for my paintball littles ❤
-
MY MAN! These things are just getting better by the day! I want to contribute to this project so badly.. No promises, but have been working on some things in my free time, hopefully can send your way eventually. BTW -- I was sailing on the 7 seas yesterday and happened across one of your videos out there. 👍👍
-
"Then this happens" lol I've always found that knowing what NOT TO DO is far more valuable than simply knowing what to do.
-
A couple ideas for the spoon: Maybe make a form/mold, like they use for wood bending, for bending a standard shape you want. Also have you tried using a hotairgun to heat them up?
-
Your fuse could do well with a simple paper straw. It would extend from the screw top to the bottom with a load of ignition compound.
-
Doin the LORD’s work. Thank you, bro.
-
Hopefully watching this video doesn’t get me in trouble 😬. Interesting video though
-
Great content
-
I also tried the same some years ago with an old deactivated frag grenade. I used the same time fuse. I only put some fine black powder with dextrin on the top and used a normal primer. Instead of NC lacquer you can dissolve gun powder in acetone or methyl ethyl ketone. Not sure if it's better but it works. Maybe you can just put a drop of black powder on the smoke composition instead of this green fuse. Or a small line of powder. Might be cleaner and less "explosive". I like the work you put into it. And your homemade primer sound really quiet and seem reliable. 👍
-
Great stuff!
-
You should do a teardown of the TAG-67 airsoft replica of an m67. Would be awesome!
-
Impressive. Immediately subscribed!
-
Nice, these things are awesome but most people rearm them incorrectly.
-
What is the self life of the mix in the canisters. ? Or in some air-tight container. Thx
-
Zip ties also work instead of string for closing off the time fuse. I spent some time as part of a fireworks club.
-
Great content, thanks
-
Thanks for the info, just learned about your channel from that dude who wears his sisters pants, subscribed.
-
You sure do like your CA glue, lol. And that box cutter was really cool. Wish you knew the brand of it.
