Autel IM608 XP400 PRO All Keys Lost Jeep Liberty P0513 invalid skim key!
12,645
Published 2022-10-06
Donation:Cashapp: $GCDT or venmo @Louis-Roberts-26 or Zelle- [email protected]
All Comments (21)
-
Thanks dude your video are second to none!
-
Excellent job! Never knew this information until now
-
Good job mate! Big ups!
-
Thank you for showing there is a work around for these situations. Locally to me if you have a good relationship with the parts dept they will give you the pin code from the fca dealer connect site
-
Good quality job . I have done it my self usually after someone replace the immo with a used module and don't get the old car vin number . I dont write the eeprom back i just get the pin and finish by obd
-
Good helpful video
-
thanks!!
-
How do you know under what sub menus to go to For example the st95xxx and st95080?
-
good video!
-
good video
-
How do you program the remote?
-
wonderful 💮🌸💐🌼🌷🌻🌺🌹🏵
-
I know I’m kinda late watching this video but I’m wondering how to program the remote? I can’t find it anywhere and I’m wondering if the only way to program a remote is when you’re writing it using the xp400. The liberty I’m working on has only a regular key with no remote.
-
I am wondering why you didnt just pull the 4 digit pin with the 608 and do a normal "WCM replaced" programming procedure with witech? They just upped their cost per vin but this would have been way faster/easier with an $80 vehicle sub through mopar. Interested if I am missing something here.
-
Since you are starting with the original that used to work, you might have a skim malfunction rather than a need for new key. How do you decide that reading the pin is the prescription ?
-
Hola , donde o como sabes q tipo de chip tienes en la antena veo q hay muchas opciones en la maquina , en que casos hay q hacer de esta forma y no por obd ? Gracias
-
can you delete the old keys stored on the imobilizer, 1 through 6 ?
-
wouldnt it be easier to just add key via obd? done this a few times
-
what if we don't have any keys to cut what is the best to get the key code to cut
-
You can skip all those extra steps and just hit one step processing be done.