Case Steam Engine Governor: Rebuilding the Spool Valve Stem
Published 2024-07-19
Support VintageMachinery.org on Patreon:
www.patreon.com/vintagemachinery
Make a one time donation to VintageMachinery via PayPal:
www.paypal.me/VintageMachinery
Please Visit: www.vintagemachinery.org/
Sponsored by:
American Rotary Phase Converters
www.americanrotary.com/?sld=krucker
Use checkout code "Vintage10" for a 10% discount on all AD, ADX and AI converters!
All Comments (21)
-
You made me remember David Richards steam powered machine shop. He's not posting as often now but in the past, He has rebuilt a few Pickering Steam Engine Governors along with a few steam Engines! Now that I'm reminded of it, I miss watching The Wizard. Hope He's doing alright these days.😕... National treasure Old Guys keeping us wise in the old ways... Thanks for Doing All you do...✌👍
-
So awesome to see the precision and oldschool, but still totally valid, engineering on such a device. Mr. Rucker is a master, and it shows. So satisfying to see this machine put back together right. She's good for another few decades, as long as maintained properly.
-
Being an old school Journeymen Industrial Machine Repairman, I learned a long time ago, when I had to redrill and pin an existing hole, I would put the tapered reamer into the original hole and then clamp it in a vice. That way the original hole is perfectly aligned. Then remove the tapered reamer and use a drill bit the same size as the top hole. Using it as a guide bushing to keep the drill from walking. After marking the shaft, I would use the proper size drill bit to drill the hole through the shaft. The install the tapered reamer and then ream it to the finished size. 👍
-
Oh you beauty, I have just sat down to my morning coffee and had just wondered what shall I watch?
-
Hey Keith, if you’re happy, I’m happy!
-
Excellent work. Who does not love turning brass?
-
Thank you Keith!
-
Another excellent video Keith- being from the UK I've worked in metric so long I find it really hard to convert fractions and 'thou's in my head!
-
l seem to recall you saying never wind a reamer backwards as it will blunt them
-
Gotta admit that newly turned metal is gorgeous.
-
There may have been too much play, but a loose connection of the rod to the valve is useful for the flat closure
-
Thanks Keith for interesting precise video. Your going through the thought process, why you changed the original engineering and the tapered pin joint, was particularly good for a fellow like me.
-
Thanks for sharing another great video Keith!
-
Good morning Keith! Thanks for the videos.
-
Nicely done sir!
-
Thanks for the video Keith. Have a good weekend!
-
Oh, you turned the reamer counter ckockwise. 😮
-
Who knew this little steam engine governor job would bring out soo many internet trolls😮
-
That looks like it will work.
-
Thank you for sharing.👍