The STRONGEST Plastic Weld Fix To ANY Broken Or Cracked Plastic Pieces! How To DIY

ITEMS I USED ON THIS VIDEO: - Plastic Welding Kit - amzn.to/4b6bXwY - Plastic Welder - amzn.to/47JkRO1 - Aluminum Foil Temp - amzn.to/3HpDqMe - Weller Soldering Iron - amzn.to/48MJhHS

Right to the point. Clear instruction. No bull talk…straight to the fix. Much appreciate you sharing. Thank you.

Great Video, No clickbaiting, no BS, straight to the point, informative, evaluating, Top Class!

I've been using metal window screen for years for this plastic fix, happy to see that it's the strongest of the 4. It works, it's easy, and it's strangely satisfying melting the screen into the plastic. Plus you fixed your shit you thought you would have to throw away. One important thing: if you are adding plastic you need to use the same type of plastic, often I've removed some from a spot that's hidden or doesn't matter. Don't be afraid to try this fix, it's easy and fun. I have never even added steel wool, the screen is so strong it will never rebreak where you put the screen

I saw titles like this on many videos before and never clicked them because I thought they were just click baits and would never work. Until today I saw it posted by you, the guy I trust, and checked it out. I am glad I watched it and learned something useful. 👍

Tip on using the staples - while it's still hot, after you've pushed down to depth... give it a slight twist (like you're turning a bolt) then release the trigger. This kind of buries it under the virgin plastic. I do that when repairing bumper covers. And always use flush cutters to snip the ends off, then a tiny hit with a grinder to make the cut tips be under the surface before finishing.

I've got a very good supply of tools for plastic soldering. I find that marrying method #1 and method #4 is best. Staples first for deep penetration. Next, FLUSH cutters - not wire cutters - to remove the staple ends. You need a decent pair of those though as many aren't rated for the thicker steel in some plastic staples. Next, melt with plastic welding rods to add material when adding either steel wool or wire mesh. Lastly, more welding rod deposits to smooth out the surface. Sand and/or polish as required. Acetone on wet/dry sand paper can work, but you must work quickly and rinse well.

I just did a major repair using my heat gun, with the smallest nozzle, combined with helping the softened plastic to bond by using a flat screw driver to mix the plastics together. I don't need the extra strength, but I planed to install some home made wire pieces, bent like those commercial heated wires. After watching the video, I am going to use steel wool instead, just because it will be easier. For the last 40 years, I also used a Weller 280 Watt soldering gun, that has a flat pad attachment for welding plastic. I enjoyed watching the testing. It just confirms my experience.

Method #4 with the hot staples will be stronger if you turn the staples approximately 90 degrees from where you had it, so there will be multiple places where a single steel staple crosses the crack. You want it to zig-zag across the crack, not zig-zag on either side with one little wire crossing.

zip ties melt nicely as fillers doing this

That's a brilliant trick using steel wool for plastic welding. Thank you !

Great video. I suggest doing this in a well ventilated area and avoid breathing in the fumes from the melting plastic.

I appreciate your method of testing the strength of each method so we know what works best. Great video

I use a soldering /welding kit with the mesh. I haven't had one fail yet, but it was impressive to see how strong it can be. Hadn't thought of using steel wool for added reinforcement, so thanks for that tip. I've seen those wire welders you used for method 4, and I was wondering how strong they would be. I'll stick with the mesh.

Thank you thank you thank you this is gold to me I do body work and been experimenting with the plastic welder but I never thought about adding steel wool it’s like fiberglass strands to body filler. It’s a game changer 💯💯💯

Oh my gosh... what a coincidence that you posted this! It's snowy here in the Northeast, and my car fender cover got stuck on a chunk of ice and came loose. It was hanging by one screw as the plastic tabs broke. I'm getting the welding kit you recommended as I can think of many things to repair with it! Thanks for posting this very helpful video!

Great video, Sir! But... You forgot one of my favorite plastic repair methods- Using stainless steel automotive band clamps. Simply open one up and flatten it out then use it as a suture on the broken area. The laser cut micro grooves work well to enmesh the plastic together, it is incredibly strong and also rust proof. Additionally, it is perfectly smooth and flat for a nice finish. Thanks again and keep up the great work. Jeffrey Z. in SC

Straight into the point 👍🏼 GREAT INFORMATION!!! 💯🔥 How many countless times have I wondered how to fix broken or snapped plastic... Now I know. Thank you so much 👍🏽☺️

I started using steel wool a couple of months ago yours is the first video 2/2/24 that I seen someone else using it you did a great job in video thank you

Excellent video! Might also be a good idea to use stainless steel wool in case any fibers are not completely encapsulated in the plastic and rust won't work it's way into the patch. The included mesh in the kit is stainless. I bought one of welders in solution #4 for several repairs and didn't get a chance to use it yet. I'm bummed that it's past the return time limit, but at least I didn't waste my time with repairs that would fail. Thanks for the info.