Easy Way To Sharpen A Chisel As Sharp As A Razor
1,038,401
Publicado 2024-05-26
I hope you enjoy watching my video!
► Subscribe: bit.ly/Creationholic
On Creation Holic channel, you can learn various inventions, science projects, crafts and DIYs teaching how to reuse or recycle.
© Copyright by Creation Holic ☞ Do not Reup
#diy #tipsandtricks #diyprojects #tricks #inventions #Sharpen #diy #chisel
Todos los comentarios (21)
-
Just get a Veritas or Eclipse sharpening jig. Job done.
-
Honing guide, wet stone, then leather strop and paste. Wood + water not a good combination.
-
I thought everyone knew about the two bevels on a chisel??? I knew it in shop class in 1964 and it has worked excellently for me since then through hundreds of chisels of various sizes......
-
First you need to flatten the face of the chisel then work the bevels😢 and the wood is destroying your water stone
-
Will try it for once
-
Try using all of the saw blade. Save a lot of effort and steel by using a second bevel for a cutting edge. Love the wedge device.
-
Спасибо за видео полезные 🎉🎉🎉🎉❤❤❤❤❤❤
-
Exelente 👏❣️ saludos desde Uruguay 🇺🇾 Montevideo. Solo decir que ni loca hago todo eso para afilar....te felicito 😊
-
Not only will this clog up your stone, the water will cause the wood to swell lifting the edge of the chisel off of the stone.
-
แบ่งปันเลิฟไทยแลนด์🇹🇭❤️❤️❤️
-
Thank you for sharing these great tips.
-
Every chisel and plane iron should have two angles on the cutting edge unless I have been doing it wrong for 60 years as a joiner
-
And load the stone up with wood pulp.
-
Total waste of time and not easy at all. The battery part was nonsense, too (only dulled the edge, didn't refine it at all).
-
You don't need to use a battery to strop the chisel. Get a old leather belt and lay it on it's face. Then add the toothpaste or cleanser with water to the leather and pull the chisel edge across the leather. It looks like there is a double bevel on the chisel: an angled edge on both sides. While this is okay for rough work, it means more work being done for accurate use, compensating for the chisel wanting to move upward in the cut. The bottom of the chisel needs to be absolutely flat, hopefully with a little hollow area about 1cm from the tip.
-
A good advert for buying a Tormek!
-
You repair it with wood very well, it's easy to do so anyone can sharpen the chisel.
-
Now the stone will develop a hollow from only using half its length due to the wooden block. Proper use of a stone is to use its entire length
-
1 잘 배우고 갑니다
-
Thank you for sharing! I usually use an angle grinder to sharpen 👍👍