Kenwood TS690S(TS450S) common audio output issue...Easy Fix๐๐๐
10,027
Published 2020-02-24
All Comments (21)
-
Thanks for the extensive explanation, today I fixed my TS-690 thanks to you ...73
-
i enjoyed the video very much very helpful to me , and I have a Kenwood ts 450s the capacitor in c104 is discolored it look the same as the one you showing your video but it does look like bulging out on top or bottom would you thing it would be bad thanks very much from W5ESH
-
Hi same problem audio got board out and the Capacitor donโt look good not got of board yet see itโs a 470 uf 10v what would be a good replacement upgrade thank you
-
Hi Breton, I am facing a problem on audio. I have a kind of QRM and it seems that audio output lost its power. By the way frojm you video I am not able to understand if you are fixing the same problem. Thanks
-
I have the 450s and on the lowest setting on FM the power is around 8 watts . Can you tell me which pot will turn the FM output down to around 4 watts on its lowest setting Many thanks Andy
-
Hi Brenton, having the same issue with the tx, 10w all bands, all modes- didnyou manage to sort this one?
-
Will this also effect transmit audio?
-
Good morning,how are u?I have the same problem,i would like if possible to let me about the capacity of the three capasitors...thanks a lot,spyros sv8gth
-
I have a 590sg with no audio. Would this be same fix?
-
What is the going price to totally recap a kenwood. TS-140s ? Thanks
-
Were can I find if unit for Kenwood ts450s
-
The PCB under my C104 was dissolved, or otherwise stripped, down to copper, so I replaced C104 even though it was within spec. I still have low power on TX. I removed and tested C99 and C101 as well, and they're within spec. Is there another common cause of low (10 or less wattage) output on a TS-450S besides C104, C99, or C101 leaking?
-
Where can I get.the.power.cord for a 690s
-
What is that caps capacitance? and the other two larger ones? I have a audio output problem where it blanks out the audio output, same if you put too much audio into it. Thanks, No Sign.
-
ฤฐ Have low audio problem.it is Due to c104 too??
-
Would that also cause low audio output locals tell me I sound like I'm far.away
-
so if you have loads of output on pin 4 is that correct or incorrect?
-
Can anybody tell me how to adjust the HF for am stations, I own a Kenwood TS-140s, When I use my scanner, am is fine, but the Kenwood will pickup the am stations. Thanks
-
Same problem for the 850?
-
Ciao Breton, volevo chiederti se conosci un software per gestire un kenwood TS690 SAT. Puoi darmi qualche notizia, ti ringrazio e ti saluto Alfredo IU0NIB