FlyWoo New FPV Flight Controllers & Accessories

I have a couple of these F405 AIO's. One of the main selling points was that the 9V BEC can be hooked up to a controller switch with USER1in betaflight, however when you have bidirectional dshot turned on and the pinio mapping for the switch configured the 9V power will just turn off after about 10-15 seconds regardless of the position of the switch. You have to disable that functionality by setting the pinio 1 resource to none to get the stupid thing to stay on at all. Otherwise it's a great FC, got one in a Flylens 85 and another in a Fractal Wingman.

2:50 killed me 😂

On the whoop board what is the brownout voltage for stepping up 1s to 9v for a digital vtx?

Mads Tech does Flywoo show and tell. Flywoo make good stuff.

Thanks Ian! Is that larger whoop aio have an 8 bit ESC or a 32 bit?

I seeBL- 32 on the bigger Esc, is that BLHeli 32 that just went away?

Thanks Ian for you job. The F405 and F745 of the AIO is version 1mb or 512kb?

Will the Bipolar Dual 5.8ghz only antennas work well with the walksnail dual vtx? - I realize it likely wouldn't be as good as 2 antennas, but curious if this would work for simpler mounting, especially on smaller drones.

Awesome stuff, Ian! Thanks for the overview! 😊 Stay safe there with your family! 🖖😊

Cool a storage box review 😛

What is their plan for continuing the supply of BL32 ESC on the io?

Please make 8S 5 inch. Thank you!

Thanks buddy! 👍

Ian thinking about baby Yoda at 12:26! :)

Do these new AIOs support INAV?

They should just release the STL or at least sell the stl so we can fix that design

I lost faith in Flywoo after I got 2 POS naked hero 12's with some bullshit customer service when trying to resolve it...

RIP BL32

Stuff nearly in box taken out to put in a box that stuff doesn't fit in.... for an extra $20+ 😂

it's alright, nothing special. the DarwinFPV Cement line however ... 🥳