DJI Avata 2 Free FCC Power & Speed Hack - Ham Is Back

Important Update - New Firmware Fixes HAM For CE Users With the release of the new firmware V01.00.0300 for the Avata 2 DJI have fixed the HAM file behavior in the CE region. Now the ham file behaves as it did with the Avata 1 and O3, It gives FCC power, FCC Speed and full Manual Channel Selection. There is no longer any need to purchase any 3rd party apps for the full FCC mode in CE regions. Where I show in this video that there are 4 modes that is now incorrect and there are just the original 3 that are CE Mode, FCC Mode and Ham Mode. I have created a new chart that is linked below on my Wiki and I will be making an updated video in due course. fpvwiki.co.uk/dji-goggles-3

The range and penetration for mid range flying is absolutely phenomenal. I live in a small town with 3000 people, right in the middle of it and while laying in bed I can fly a full circle around my self, being 1500 meters away. As long as I stay above 30 meters or so. Except for a bunch of spots where the signal has to travel through less buidings. There is a school 600 meter from my house and I can be down to 7 or 8 meter and still have 3 mbit left. As a matter of fact, I have done some 100 flights while laying on my bed and there where plenty of occassions where the video quality went down a lot and the bitrate went to 1 mbit but I have not lost signal a single time. I usually just fly straight up when bitrate down down to much. The Goggles 3 and avata 2 is the ultimate fpv-noob-who-never-wants-to-worry-about-anything flying experience.

What I like most about what you do Ian is that you interact with your followers. We all have burning questions and you take the time to offer answers. I like that a lot. Also thanks for this update - I'll be doing it today and look forward to a bit more RF. I'm in the UK. Lee

Wauw! This works amazingly well. Normally when I fly behind some trees that are like 80 meters away from me, I always get picture loss. Now, with that file installed, it's just normal picture. It's so much better at distance and with penetration through buildings. Thank you Mads Tech!!

Finally a video explaining how to make the file, I’m in a fcc region so almost got everything, but extra channels sounds good

The biggest benefit is the full power of the motors and you can check it easy with motor power output. Without the hack you must stay around 50% throttle to hover in manual mode. In Ham you only need 20%. Thats the easiest way to check If the ham file work!

Grande,sempre sul pezzo, complimenti.

Brilliant, Ian. Nice work. Appreciated from a casual flyer

Hats off to you Sir!!

hoooly, thats like a punch when you first feel the boost in speed and accleration. the startup sequense with googles controller and drone was the thing that made mine go in to fcc. i didnt follow the sequence at first and i was still in ce mode. Thanks for sharing this "mod" i may be fine with this drone for now, i was relly in to bying a real custom fpv but i think i can wait now :)

Pretty interesting indeed! Thanks, Ian! 😊 Stay safe there with your family! 🖖😊

Thank you so much for the info. CE mode is even dangerous when coming from FPV because the Avata 2 ascending speed is less than 1/3 than its horizontal speed, the balance between the two speed domains is broken. FCC mode restores that !

this video is absolutely perfect. Fantastic work.

I concur, after watching your video saying it wouldn’t work and losing signal behind a bush 80m away i thought f”£k it, nothing to lose. Bam, instant improvement, signal does not below 50mb, before it was down to 15. Auto is still locked as you explain. I was also losing signal inside the house, now I do not lose signal indoors at all.

Thank you for this . VERY much appreciated!

It works like charm. Thanks

This guy keeps amazing me! 🤩

Hi thanks for all your help and I can say that the hack does give you more penetration Also the return to home when lost signal dose turn around and retrace it’s step till it reconnect even turning 90 degree’s also I have seen the wobble when it starts to return to home

Excellent video. Slightly of subject but does the ham file still work on the goggles 2 with the 03 the same as it always did. Really appreciate all your videos Ian. Keep up the good work 👍🏻

Thanks for this - will the CE Ham mode work with the RC2 as well.