UCS Millennium Falcon Vertical Stand Build and Install Tutorial!! (Efferman Vertical Stand MOC)
38,713
Published 2020-07-10
I will show how the pieces to build the stand were packaged as well as Knelling them out to show what kind of pieces are used in this MOC to build the Vertical Stand.
I attached a Speed build to the video and out it to some music, but if you wish to skip past the build it ends at 13:22.
After I assemble the stand I try different things to get the Millennium Falcon mounted on the stand without having it break. After trying a few things I show how I was able to mount the model and what kind of damage was done to it during the process of the install. Hopefully this can help you avoid making the mistakes I did and prevent any damage when you are mounting yours!! After getting the Millennium Flacon LEGO set 75192 mounted of the MOC Efferman Vertical Stand I will show you close up how it connects to the model and how sturdy it is while it is on it.
I will take you through the final step which is putting my Holy Grail of a LEGO set on display in my LEGO room!!
If you enjoy this video please give it a thumbs up and Subscribe to the channel to show your support. Make sure to hit the bell notification to stay up to date on my future videos.
Check of LEGOFanUK on Youtube
/ @boombrickz
Follow me on Instagram @AandAHobbies
@Cory_lurette
Here is a Link for the Stand from ReBrickable
rebrickable.com/mocs/MOC-10219/Lucioswitch81/effer…
I bought my Stand off a website called Etsy for $73 Canadian dollars including shipping
www.etsy.com/ca?utm_source=google&utm_medium=cpc&u…
#LEGO #StarWars #UCSMillenniumFalcon
All Comments (21)
-
I've watched car crash compilations less stressful than this. Mad props to you, man.
-
Thank the stars for this video. I had to disassemble this wretched thing three times before I figured out where I kept going wrong, and then I totally wrecked the top of my Falcon in the mounting process. Easily the worst building experience I've ever had, but now that it's repaired and attached.....it is a mighty fine stand.
-
i’ve tried everywhere the pdf instructions, thank you for posting this, playing you scanning over the instructions at .25 speed i was able to get my stand built. thank you so much
-
I’m so glad for your video. I have just finished assembling my Millennium Falcon and most of it fell apart as well. I’m still trying to reassemble the bids that fell off before trying the stand again, but at least you have given me a good idea on how to achieve this on my own. So thanks. I also struggled with the instructions, but as I’m in the Uk I had a paper version of which I had thought was good, but it’s really bad, as you highlighted. I persevered and now I’m eager to see if I can get my falcon on it without any more damage. Unfortunately, I’m waiting on spare parts from Lego as some went missing. There should be a damage warning on the stand instructions or at least instructions on how to get it on without damaging our hard work. 😬
-
OMG what a MAJOR PITA!!!! I did figure out a tip that helped me flip the Falcon without a bunch of pieces falling off. I ordered 10 rolls of elastic bandage off eBay. Of course I punctured my thumbs and fingers with these little clips, but I was able to flip the whole ship upside down-by myself. Truth be told some pieces did fall off. I only used 6 rolls. Maybe had I used all 10... Anyway after gathering dust for a year setting on a table I now have the Falcon inside a huge plexi-case! Much easier to dust!! Anyone wanting to try the elastic bandages, the ones I ordered off eBay were 3" wide. You may want to try different widths. Or not, the 3" worked for me. A word of caution, they can get in the way of attaching the stand, make sure none are between the stand and hull, the stand has zero wiggle room. Good Luck!!! And a BIG Thank you to A & A Hobbies for showing me the way to attach the stand!!!!
-
Thanks for the video, knowing how it attaches mite make it easier, I've also added the Light My Bricks kit, deff worth a look, thanks again
-
Very cool! I think this is what I’m gonna go for when my falcon arrives.
-
thank you I finish the base today and had a lot troubles to put the 2 pieces
-
Awesome video mate, that looks like probably the scariest thing you can do with LEGO ever! So pleased you didn’t drop it! I also think you have genuine LEGO pieces as I don’t think technic has the logo on it 👍🏼 Looking forward to seeing a video on a room tour
-
Looks Great I would love to do this!
-
Great video!
-
The stand looks great! I ordered one for my falcon. Should come by Christmas. Hope I don't drop it!
-
im debating either doing this or buying the wicked brick stand. im just trying to figure out which is the better.
-
Awesome vid!! Here is what i did at step 700 ish I installed the stand and was able to finish it with stand on. Also you can slightly modify landing gear to put 2 back on. Chers
-
Very useful video thanks. Instructions are shocking as you said. I had to take a picture of most stages and zoom in they were so small and then nothing showing how to fit the falcon on to it! I would never have known to remove the landing gear 🤣
-
Thanks this helped me alot, i notice better to put it on in a early stage
-
The Stand looks great. Pretty nervous when you were first trying to install it
-
thnx dude i am just building mine so a stand is in the near future nice to see how it hooks up to the UCS. To bad the instructions are so vague
-
Mate just watched this and felt your pain as you installed the stand. This will be me today!!
-
It was pure fear and horror, my fingers are to big. I (with the help of my wife) did it, part thanks to your video. She looks great!!! Thanks
